Liquid Elements T3200 V3 Random Orbital Polisher 125mm 750W

Liquid Elements T3200 V3 Polisher

The Liquid Elements T3200 V3 eccentric polisher has a 10 mm polishing stroke, a standard fitted 125 mm backing plate, and a power of 750 watts. Thanks to the constant speed control with remote electronics, the free-spinning rotation of the backing plate does not stop, even with a slight tilt on rounded surfaces.

Whether you are a complete beginner in vehicle detailing or a professional detailer, this machine is suitable for every user!

Eccentric car polisher

With its modern design, pleasant feel, and robust and smooth-running electronics, the T3200 stands out. The two LEDs on top of the polisher indicate the correct pressure range during the polishing process. When the green LED is lit, the pressure is sufficient; when the red LED is lit, the pressure on the surface should be reduced.

Dual action polisher 125mm and 75mm

This dual action polisher comes standard with a pre-assembled 125mm backing plate. This can optionally be replaced by a 75mm backing plate. By converting the machine to a 75mm (3 inch) backing plate, you can also use the polisher with smaller polishing pads (75mm/3″).

Features Liquid Elements Polisher T3200 125mm

• Eccentric polisher
• Motor with a maximum of 750 Watts of power
• Equipped with 125mm backing plate
• 10mm orbital stroke
• Constant speed control with remote electronics
• Low vibrations, very smooth in use
• Torque control indicator with green and red LED
• Ergonomic design
• Soft rubber grip
• Lightweight
• Detachable 8-meter power cable
• Optionally usable with a 75mm backing plate

Package contents Liquid Elements dual action polisher

• Polisher T3200 V3
• 125 mm backing plate (pre-assembled)
• Storage bag
• Replacement carbon brushes
• Allen key
• User manual

Technical specifications T3200 V4 Liquid Elements dual action polisher

• Voltage: 230V
• Frequency: 50 Hz
• Power consumption: 750 Watts
• Speed: 2500-5500 rpm (adjustable)
• Orbital stroke: 10 mm
• Backing plate diameter: 125 mm
• Backing pad thread (spindle size): 5/16″ -24
• Weight: 2.4 kg
• Lpa (sound pressure): 84 dB (A)
• Lwa (sound power): 95 dB (A)
• Cable length: 8 meters (detachable)
• WEEE Reg. no. DE 64199561

Carbon brushes
The pre-installed carbon brushes (1 pair) in the machine have an average lifespan of approximately 350 hours of actual use. This corresponds to detailing about 50 vehicles. Proper handling and use of the machine during the polishing process are required to ensure the carbon brushes last a long time, as their lifespan can otherwise vary greatly.

Please note: The machine comes standard with replacement carbon brushes, so 2 pairs of carbon brushes are included in the delivery.