Gtechniq Crystal Lacquer:
Gtechniq C1 Crystal Lacquer provides a durable, glossy, scratch-resistant car with less maintenance.
How do I use Gtechniq Crystal Lacquer And EXOv5?
- Preparation: Ensure your vehicle's surface is thoroughly cleaned, clayed, polished and degreased with Gtechniq Panel Wipe or your favorite isopropanol degreaser.
- C1 Crystal Lacquer (base coat):
-Apply a small amount of Crystal Lacquer to a soft applicator pad or dedicated coating applicator pad.
-Rub evenly over the surface with both horizontal and vertical motions, overlapping for even coverage.
-Allow the product to cure for a short time according to the recommendations on the product packaging.
-Wipe off any excess product from the surface with multiple new coating microfibre cloths to achieve a clean finish without any residue. - Optional EXOv5 (topcoat):
-Apply a small amount of EXOv5 to a soft applicator pad or dedicated coating applicator pad.
-Rub evenly over the surface with both horizontal and vertical motions, overlapping for even coverage.
-Allow EXO to cure according to the recommendations on the product packaging.
-Wipe off any excess product from the surface with multiple new coating microfibre cloths to achieve a clean finish without any residue.
Features of Gtechniq Crystal Lacquer And EXOv5:
- Durable protection.
- Gloss retention.
- Reduction of scratches and swirls.
- Hydrophobic properties.
Safety Data Sheet (MSDS) Information:
Labelling (EC No. 1272/2008 [CLP]):
Hazard pictogram: No hazard pictogram
Signal word: None
Contains: Not specified
Hazard statements:
• H225 – Highly flammable liquid and vapor
• H304 – May be fatal if swallowed and enters airways
• H315 – Causes skin irritation
• H336 – May cause drowsiness or dizziness
• H412 – Harmful to aquatic life with long lasting effects
Precautionary statements:
• P102 – Keep out of reach of children
• P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• P233 – Keep container tightly closed
• P280 – Wear eye protection, protective clothing, protective gloves
• P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water
• P501 – Dispose of contents/container to a hazardous or special waste collection point
Download the Safety Data Sheet (MSDS) and/or Product Data Sheet here:
Click on the name to download the file:
MSDS FILETECHNICAL DATA SHEET
Please note the following general instructions:
- Coatings should only be applied with the necessary experience.
- If explanation is needed, consult our help.
- Before use, verify that the product is suitable for your specific application.
- This product information serves solely as non-binding advice.
- No liabilities can arise from this.
